Biosolids-Derived Biochar for Triclosan Removal from Wastewater

Micropollutants, including antibiotics, hormones, pharmaceuticals, and personal care products, are discharged into the environment with liquid and solid effluent streams from water resource recovery facilities (WRRFs). The objective of this research was to determine whether biosolids-derived biochar (BS-biochar) could be used as a sorbent in continuous flow-through columns to remove micropollutants as a polishing step for wastewater treatment. Triclosan (TCS) was selected as a representative micropollutant due to frequent detection in liquid effluents, residual biosolids, and surface waters. Bench-scale column experiments were conducted to determine the effect of flow rate and competition due to the presence of other organic micropollutants and inorganic nutrients on TCS adsorption to BS-biochar. TCS removal efficiency was compared in Milli-Q water and secondary wastewater effluent by using two commercial adsorbents: a granular activated carbon and a wood-based biochar. Increased removal of TCS was observed at lower flow rates (2.6 gpm/ft2) compared with higher flow rates (10.3 gpm/ft2). Presence of inorganic nutrients (NH4+ and PO43−) and organic micropollutants 17β-estradiol and sulfamethoxazole decreased adsorption of TCS to BS-biochar. TCS was sorbed to BS-biochar in wastewater, but percent removal decreased in wastewater relative to Milli-Q water. This study demonstrated that BS-biochar can remove TCS from wastewater in continuous flow-through columns, although to a lesser extent than activated carbon. An additional benefit of using BS-biochar is that WRRFs could re-activate biochar on-site by using a pyrolysis reactor

Ion Exchange for Nutrient Recovery Coupled with Biosolids-Derived Biochar Pretreatment to Remove Micropollutants

Wastewater, especially anaerobic treatment effluent, contains high ammonia nitrogen (NH4-N) and inorganic orthophosphate (PO4-P), which necessitate additional treatment to meet stringent discharge regulations. Ion exchange regeneration is a process that can be adopted for not only removing but also recovering nutrients. However, recovering nutrients by ion exchange from nutrient-rich effluents that also contain micropollutants (which typically pass through anaerobic treatment as well) may result in subsequent problems, since micropollutants could end up in ion exchange effluent, regenerant, or recovered fertilizer products. Micropollutant removal by a nonselective adsorbent, such as biosolids-derived biochar, before nutrient recovery processes would mitigate potential risks. The objective of this research was to evaluate the capability of biosolids-derived biochar as a pretreatment step for separating micropollutants from nutrient-rich water before ion exchange for nutrient recovery. In the presence of ammonium and phosphate, both pristine and regenerated biosolids-derived biochar could effectively adsorb triclosan (TCS) and estradiol (E2), and to a lesser extent, sulfamethoxazole (SMX) in batch sorption experiments. On the other hand, nutrient ions were not effectively adsorbed by biosolids-derived biochar. A continuous flow-through system consisting of columns in series filled with biochar, LayneRT, and then clinoptilolite was operated to test selective removal of micropollutants and nutrients in a flow-through system. The biochar column achieved more than 80% removal of influent TCS and E2, thereby reducing the chances of micropollutants being adsorbed by ion exchangers. Sulfamethoxazole removal through the biochar column was only 50%, indicating that biosolids-derived biochar would have to be optimized in the future for hydrophilic micropollutant removal. Influent nutrients were not effectively removed by the biochar column, but were captured in their respective selective ion exchanger columns. This research revealed that biosolids-derived biochar could be employed before ion exchange resins for removal of micropollutants from nutrient-rich water

Removal of Antibiotic Resistance Genes in an Anaerobic Membrane Bioreactor Treating Primary Clarifier Effluent at 20 °C

Anaerobic membrane bioreactors (AnMBR) play a key role in future plans for sustainable wastewater treatment and resource recovery because they have no energy-intensive oxygen transfer requirements and can produce biomethane for renewable energy. Recent research results show that they can meet relatively stringent discharge limits with respect to BOD5 and TSS when treating municipal wastewater primary effluent. Sustainable used water recovery plans should also consider removal of unregulated pollutants. Antibiotic resistance genes (ARGs) represent an important emerging contaminant due to public health concerns surrounding the spread of infections resistant to common antibiotics. Conventional activated sludge processes have demonstrated mixed results regarding ARG removal. The objective of this research was to determine the impact of an AnMBR on ARG removal when treating municipal primary clarifier effluent at 20 °C. AnMBR treatment resulted in 3.3 to 3.6 log reduction of ARG and the horizontal gene transfer determinate, intI1, copies in filtrate. Membrane treatment significantly decreased the total biomass as indicated by a decrease in 16S rRNA gene concentration. Microbial community analysis via Illumina sequencing revealed that the relative abundance of putative pathogens was higher in membrane filtrate compared to primary effluent although the overall bacterial 16S rRNA gene concentrations was lower in filtrate. Membrane treatment also substantially reduced microbial diversity in filtrate compared to anaerobic reactor contents

Cast Iron Drinking Water Pipe Biofilms Support Diverse Microbial Communities Containing Antibiotic Resistance Genes, Metal Resistance Genes, and Class 1 Integrons

Antimicrobial resistance is a well-documented public health concern. The role that drinking water distribution pipes have as sources of antibiotic resistance genes (ARGs) is not well known. Metals are a known stressor for antibiotic resistance development, implying that aging metal-pipe infrastructure could be a source of ARGs. The objective of this study was to determine if ARGs, metal resistance genes (MRGs), and intI1 were pervasive across various pipe biofilm sample types (biomass surfaces, pipe surfaces, corrosion tubercles, and under corrosion tubercles) and if the resistance genes associated with particular microbial taxa. Eight sample types in triplicate (n = 24) were taken from inside a \u3e100 year-old, six ft. section of a full-scale chloraminated cast iron drinking water main. Droplet digital PCR (ddPCR) was employed as a novel approach to quantify ARGs in pipes from full-scale drinking water distribution systems (DWDS) because it yielded higher detection frequencies than quantitative PCR (qPCR). Illumina sequencing was employed to characterize the microbial community based on 16S rRNA genes. ARGs and MRGs were detected in all 24 pipe samples. Every sample contained targeted genes. Interestingly, the mean absolute abundances of ARGs and MRGs only varied by approximately one log value across sample types, but the mean relative abundances (copy numbers normalized to 16S rRNA genes) varied by over two log values. The ARG and MRGs concentrations were not significantly different between sample types, despite significant changes in dominant microbial taxa. The most abundant genera observed in the biofilm communities were Mycobacterium (0.2–70%), and β-lactam resistance genes blaTEM, blaSHV, and the integrase gene of class 1 integrons (intI1) were positively correlated with Mycobacterium. The detection of ARGs, MRGs, and class 1 integrons across all sample types within the pipe indicates that pipes themselves can serve as sources for ARGs in DWDS. Consequently, future work should investigate the role of pipe materials as well as corrosion inhibitors to determine how engineering decisions can mitigate ARGs in drinking water that stem from pipe materials

An Environmental Science and Engineering Framework for Combating Antimicrobial Resistance

On June 20, 2017, members of the environmental engineering and science (EES) community convened at the Association of Environmental Engineering and Science Professors (AEESP) Biennial Conference for a workshop on antimicrobial resistance. With over 80 registered participants, discussion groups focused on the following topics: risk assessment, monitoring, wastewater treatment, agricultural systems, and synergies. In this study, we summarize the consensus among the workshop participants regarding the role of the EES community in understanding and mitigating the spread of antibiotic resistance via environmental pathways. Environmental scientists and engineers offer a unique and interdisciplinary perspective and expertise needed for engaging with other disciplines such as medicine, agriculture, and public health to effectively address important knowledge gaps with respect to the linkages between human activities, impacts to the environment, and human health risks. Recommendations that propose priorities for research within the EES community, as well as areas where interdisciplinary perspectives are needed, are highlighted. In particular, risk modeling and assessment, monitoring, and mass balance modeling can aid in the identification of “hot spots” for antibiotic resistance evolution and dissemination, and can help identify effective targets for mitigation. Such information will be essential for the development of an informed and effective policy aimed at preserving and protecting the efficacy of antibiotics for future generations

Effects of colonization, luminescence, and autoinducer on host transcription during development of the squid-vibrio association

The light–organ symbiosis between the squid Euprymna scolopes and the luminous bacterium Vibrio fischeri offers the opportunity to decipher the hour-by-hour events that occur during the natural colonization of an animal's epithelial surface by its microbial partners. To determine the genetic basis of these events, a glass-slide microarray was used to characterize the light-organ transcriptome of juvenile squid in response to the initiation of symbiosis. Patterns of gene expression were compared between animals not exposed to the symbiont, exposed to the wild-type symbiont, or exposed to a mutant symbiont defective in either of two key characters of this association: bacterial luminescence or autoinducer (AI) production. Hundreds of genes were differentially regulated as a result of symbiosis initiation, and a hierarchy existed in the magnitude of the host's response to three symbiont features: bacterial presence > luminescence > AI production. Putative host receptors for bacterial surface molecules known to induce squid development are up-regulated by symbiont light production, suggesting that bioluminescence plays a key role in preparing the host for bacteria-induced development. Further, because the transcriptional response of tissues exposed to AI in the natural context (i.e., with the symbionts) differed from that to AI alone, the presence of the bacteria potentiates the role of quorum signals in symbiosis. Comparison of these microarray data with those from other symbioses, such as germ-free/conventionalized mice and zebrafish, revealed a set of shared genes that may represent a core set of ancient host responses conserved throughout animal evolution